Hi all,
After reading through this forum and picking up bits and pieces from each pages, i managed to get Garmin Que working on my Sony Ericsson Experia X1. Here are the steps below that hopefully will be helpful to other people reading through this forum and also if you can contribute based on your experience, that would be good too.
Sony Ericsson Experia X1
using GPSProxy 2.2c from
http://www.malsingmaps.com/wiki/index.p ... y_versionsFollowing the instructions to download and configure GPSProxy and Garmin Que.
Menu > Extension
GPS Provider: NMEA Input
Select “Configure”
GPS COM Port: COM4 (Internal GPS NMEA)
Output COM Port: COM2
Menu > Extension
Select “Garmin Protocol Output”
Select “Configure” button at the bottom of the screen
Application COM Port: COM2
Menu > Virtual COM Ports
Add COM2. You should see just one Com port here. If you see more than one, remove the extra.
Menu > Settings > Launch
Tick "Start Proxy Automatically on Launch" if you want GPSProxy to start automatically
Tick "Run External App after Proxy Startup" and specify Garmin Que if you want Que to starts up after GPSProxy is running.
Garmin Que Setting
Menu > Settings > Garmin Que > Interface
GPS Device: GPS 10 Bluetooth
Communications Port: GPSProxy Virtual COM Port on COM2
Import Maps from malsingmaps
viewtopic.php?f=26&t=23Download GM-MySin.exe and run it to extract gmapsupp.img and copy this file to the phone, inside the Garmin folder that is created when Que is installed. Refer to
http://www.malsingmaps.com/wiki/index.p ... lsing_maps for steps to refer to if it doesn't work. To install the basemap, go to
http://www.malsingmaps.com/wiki/index.p ... _in_Que.3FMenu > Settings > Garmin Que > Interface
GPS Device: GPS 10 Bluetooth
Communications Port: GPSProxy Virtual COM Port on COM2
Cheers!